Stainless Steel Pipes

Stainless Steel Pipes
  • steel pipes mjpiping 300x300

Stainless Steel Pipes

Stainless steel is a variant of stainless steel in which high levels of chromium, nickel and molybdenum help improve pitting corrosion resistance. The presence of nitrogen help in structural hardening, increasing the yield strength and ultimate strength, without altering the toughness. Stainless steel Pipes consists of grains of both ferritic and austenitic stainless steel. Embedded in the same material. It is generally tougher than ferritic steel and has strength almost double of that of austenitic steel. It has excellent corrosion resistance. It successfully combats inter granular corrosion. It also prevents stress corrosion cracking in chloride and sulfide environments. The term Stainless Steel is based on the concept that they have a two phase Micro-structure consisting of grains of ferritic and austenitic stainless steel formulated in the same material. The term Stainless Steel denotes high-performance Stainless steel based on elevated contents of chromium, nickel, and molybdenum to improve pitting corrosion resistance while additions of nitrogen promoted structural hardening, raising the yield strength and ultimate strength values without impairing toughness.


Stainless steel is a variant of stainless steel in which high levels of chromium, nickel and molybdenum help improve pitting corrosion resistance. Stainless steel pipes, as a result of which users can purchase relatively lower thickness duplex pipes and duplex fittings. Stainless steel has better ductility than ferritic steel. It cannot be hardened by heat treatment, but can be work hardened. It can also be welded easily using all the standards methods of welding. Post weld distortion and residual stresses are reduced on account of low thermal expansion. This variant of stainless steel has a wide range of applications. It is used by the chemical processing industry for transportation and storage purposes. It is also used by the oil and gas plants and offshore rigs. It is also used in the oil and gas refineries. Due to resistance to stress corrosion cracking in the presence of chloride ions, it is suitable for use in marine environments. The pulp and paper industry also uses Duplex stainless steel. Moreover, it is used in pollution control equipment.

Additional Information

Product Origin

Make In India




MJ Piping is one of the pioneer brand in industrial sector and provide superb quality line of Stainless Steel Pipes. We have meticulous processes which help transform processes, improve efficiencies & enhance customer experience. We provide our clients with extremely competitive pricing & best delivery time, which leads to 100% satisfaction. We entertain both kind of orders. E.g. small & big orders with equal priority. Our competitive pricing has enabled to capture clients around the world in a short span of time. Pricing is always rock bottom for all orders. We aim to maximize our conversion rate to enter as a vendor in companies, and thus leave no stone unturned to make sure the order is bagged by us. Exports have gained prominence at MJ PIPING. We have executed export orders for clients in more than 58 countries so far. The number and volumes continue to increase.



We are one of the leading Stainless Steel Pipes Manufacturer, we design and develop products used in following applications:-

  • Petro Chemical Industry,
  • Oil and Gas Industry,
  • Nuclear Industry,
  • Pulp & Paper Industry,
  • Research & Development,
  • Mega Projects
  • Defense & Development Industries


W are one of the leading Stainless Steel Pipes Manufacturer. Salient Features of Stainless Steeel Pipes :

  • High-pressure
  • sustainability
  • Impeccable surface finish
  • Product replacement warranty
  • After sales support and service
  • High-quality
  • Packaging/ Premium Packaging 


We are one of the leading Stainless Steel Pipes Manufacturer, we Can give links here to redirect to specific page.

MJpiping is a pipe manufacturer and pipe supplier. These pipes are subject to manufacturing processes using equipment and machinery used by world class mills. Pipes are made in carbon steel, stainless steel and nickel alloys based on customer requirement. MJpiping adds a plethora of accessories such as fasteners and gaskets along with the flanges. Thus provides the customer with a one stop solution.

Stainless Steel Flanges: Introduction

Stainless Steel Pipes Properties

These stainless steels pipes usually have a high level of Cr, always above 16%, a generally low content of Ni, 56%, accompanied by elements such as Mo, Si, Mn, and Cu which endow them with a two phase structure consisting of austenite and ferrite at room temperature. Hence, their name “two phase” and “austenoferritic”. Their mechanical properties at room temperature are higher than those of austenitic and ferritic steels and their resistance to corrosion is better than that of the ferritic steels and comparable, in an acid environment, with that of the austenitic grades; their resistance to corrosion by pitting and under stress is particularly high. Duplex stainless steels are about twice as strong as regular austenitic or ferritic stainless steels, have significantly better toughness and ductility than ferritic grades (although they do not reach the values of austenitic grades), have a range of corrosion resistance comparable to the range of austenitic stainless steels, have very good stress corrosion cracking resistance, and Duplex steels are cost-effective in a number of ways.

Chemical Composition : Stainless Steel 304
Chemical Composition : Stainless Steel 316
Mechanical Properties

Types of Pipes



  • Non-availability of products
  • Late deliveries of goods
  • Poor/Unprofessional Packing
  • No control on quality and testing
  • High rejection rate
  • Poor after sales service
  • Supply of wrong grades
  • Material inconsistent with ASTM Standards
  • Very hard material for use
  • Dubious Practices
  • Lack of knowledge
  • Product fails under high pressure
  • High pricing of the goods due to supplier commission
  • Weld repair of goods.


  • Our customers highly appreciate the World class buying experience that we offer them
  • We are highly preferred for our fastest delivery service
  • We provide Mill test report in accordance with EN10204 NACE 3.1, NACE 3.2
  • 3rd Party inspection is carried out
  • Our products offer High-pressure sustainability
  • Impeccable smooth surface finish is a characteristic feature of all our products
  • Product replacement warranty is given on all products
  • We offer High-quality packaging and Packing for sea and Air transport
  • We assist Same day shipping of the goods
  • We have the Highest stock in the country
  • We follow Stringent Quality Testing and Control
  • Our products have ISO 9001:2008, ISO 14001:2004, and OHSAS 18001:2007 Certifications.
  • We have a record for <1% rejection rate of the goods in over a decade
  • We are leading distributors in more than 13 countries
  • Competitive pricing is offered
  • Our Consultancy for alternate sizes and material are highly talked about
  • We provide Heat Number Traceability on all products
  • Our ISO 9001:2008, ISO 14001:2004 & OHAS 18001:2007 serve as trust seals.

We as Duplex Stainless Steel Pipes Supplier always give good care in logistic & packaging of finish goods. Packing is an integral part of the product. We stock huge, to facilitate prompt delivery. All our products are packed in specialized carton boxes with brand identity labeling along with personal checking. We possess a perfectly developed transport system by which we can deliver goods directly and safely to the customer. The products are covered by plastic caps, to prevent damage during transit. All the bags are secured with a unique identification number, to ease the assembling process. We have an order tracking system, through these codes. We give emphasis on packaging as much as production, to provide our customers with the seamless buying experience. These fittings are wrapped by hand to ensure that finest quality of the material is maintained and no damage in the last stage of production. They come with heat number tractability and brand marking for proper identification of all products. We have exported to over 45 countries including UAE, UK, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazil, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angola & Sri Lanka.