Al6XN Tubes

Al6XN Tubes
  • sandvik-tubular-products-thermocouple-tubes

Al6XN Tubes

AL6XN is an alloy made of nickel, chromium and molybdenum. The percentage of composition of these 3 elements in the alloy is as follows, Nickel 24%, Chromium 22% and Molybdenum 6.3%, with traces of other elements such as Nitrogen. AL6XN is a super austenitic stainless steel with low carbon and high purity. The UNS designation for this alloy is N08367. Al6xn Tubes shows a good resistance to chloride stress corrosion cracking due to the high nickel and molybdenum contents.

000

Al6xn Tubes shows a good resistance to chloride stress corrosion cracking due to the high nickel and molybdenum contents. Because of the molybdenum content, it is also resistant to chloride pitting. The nitrogen content serves to further increase pitting resistance and also gives it higher strength than typical 300 series austenitic stainless steels, and thereby often allows it to be used in thinner sections. And the nitrogen content of AL6XN gives it a greater tensile strength than common austenitic stainless steels, while retaining high ductility and impact strength.

 

Additional Information

Product Origin

Made In India

Certifications

ASTM & ASME

MJ Piping is one of the pioneer brand in industrial sector and provide superb quality line of AL6XN Tubes. We have meticulous processes which help transform processes, improve efficiencies & enhance customer experience. We provide our clients with extremely competitive pricing & best delivery time, which leads to 100% satisfaction. We entertain both kind of orders. E.g. small & big orders with equal priority. Our competitive pricing has enabled to capture clients around the world in a short span of time. Pricing is always rock bottom for all orders. We aim to maximize our conversion rate to enter as a vendor in companies, and thus leave no stone unturned to make sure the order is bagged by us. Exports have gained prominence at MJ PIPING. We have executed export orders for clients in more than 58 countries so far. The number and volumes continue to increase.

ABOUT MJPIPING!

APPLICATIONS

We are one of the leading AL6XN Tubes Manufacturer, we design and develop products used in following applications:-

  • Reverse osmosis desalination equipment and pumps
  • FGD Scrubbers
  • Chemical process tanks and pipelines
  • Seawater heat exchangers
  • Tall oil distillation columns and packing
  • Offshore oil and gas production equipment
  • Pulp bleaching plant washers, vats, press rolls and pipelines

TYPES

We are one of the leading AL6XN Tubes Manufacturer, we design and develop products used in following Types:-

Types of AL6XN Tubes

  • Al6XN Seamless Tubes
  • Al6XN Welded Tubes

GRADES

We are one of the leading Al6XN Tubes Manufacturer, we Can give links here to redirect to specific page.

  • Carbon Steel Tubes
  • Super Duplex Tubes
  • Inconel Tubes
  • Hastelloy Tubes
  • Monel Tubes
  • Titanium Tubes
  • Stainless Steel Tubes
  • 254 SMO Tubes
  • Brass Tubes

MJpiping is manufacturer and exporter and supplier globally of Tubes. Tubes can be manufactured and supplied in Carbon Steel, Stainless Steel and Nickel Based Alloys. Our Steel Tubes are only of the highest quality and go through stringent in house checks for defects in quality and workmanship. Our Steel Tubes are manufactured to guarantee a tight, leak-proof fit, therefore the pipes we manufacture are used in a number of households as well as Oil refinery industries, Seawater cooling devices, Gas scrubbing plants, Pulp and paper processing industries ,Acetic, phosphoric and sulfuric acid processing plants, Research & development departments, etc.

Al6XN Tubes : Introduction

Properties of Hastelloy C22 Tubes

Chemical Composition

Types of 254 SMO Tubes

PRODUCT DETAILING

WHAT PROBLEMS CUSTOMERS TYPICALLY FACE ?

  • Non-availability of products
  • Late deliveries of goods
  • Poor/Unprofessional Packing
  • No control on quality and testing
  • High rejection rate
  • Poor after sales service
  • Supply of wrong grades
  • Material inconsistent with ASTM Standards
  • Very hard material for use
  • Dubious Practices
  • Lack of knowledge
  • Product fails under high pressure
  • High pricing of the goods due to supplier commission
  • Weld repair of goods.
  • Our customers highly appreciate the World class buying experience that we offer them
  • We are highly preferred for our fastest delivery service
  • We provide Mill test report in accordance with EN10204 NACE 3.1, NACE 3.2
  • 3rd Party inspection is carried out
  • Our products offer High-pressure sustainability
  • Impeccable smooth surface finish is a characteristic feature of all our products
  • Product replacement warranty is given on all products
  • We offer High-quality packaging and Packing for sea and Air transport
  • We assist Same day shipping of the goods
  • We have the Highest stock in the country
  • We follow Stringent Quality Testing and Control
  • Our products have ISO 9001:2008, ISO 14001:2004, and OHSAS 18001:2007 Certifications.
  • We have a record for <1% rejection rate of the goods in over a decade
  • We are leading distributors in more than 13 countries
  • Competitive pricing is offered
  • Our Consultancy for alternate sizes and material are highly talked about
  • We provide Heat Number Traceability on all products
  • Our ISO 9001:2008, ISO 14001:2004 & OHAS 18001:2007 serve as trust seals.

We as AL6XN Tubes Supplier always give good care in logistic & packaging of finish goods. Packing is an integral part of the product. We stock huge, to facilitate prompt delivery. All our products are packed in specialized carton boxes with brand identity labeling along with personal checking. We possess a perfectly developed transport system by which we can deliver goods directly and safely to the customer. The products are covered by plastic caps, to prevent damage during transit. All the bags are secured with a unique identification number, to ease the assembling process. We have an order tracking system, through these codes. We give emphasis on packaging as much as production, to provide our customers with the seamless buying experience. These fittings are wrapped by hand to ensure that finest quality of the material is maintained and no damage in the last stage of production. They come with heat number tractability and brand marking for proper identification of all products. We have exported to over 45 countries including UAE, UK, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazil, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angola & Sri Lanka.

REQUEST YOUR QUOTE NOW

CONTACT US

Reviews(0)

There are no reviews yet.

Add a Review

Be the first to review “Al6XN Tubes”